Residential Electrician: Ceiling Fan or Box Fan?

In summary, there are very few disadvantages connected to installing ceiling fans in your house plus a whole variety of pros. Oh – did I remember to mention that the fact that most realtors will tell you that ceiling fans increase the value of your house far greater than your outlay of cash to purchase and install them?

There is also the minor “con” that involves the problem of regular maintenance. Properly set up, a ceiling fan will provide years and years of pleasant cooling and cost-savings in your heating bill (assuming that you have a fan that lets you reverse the blade management). Granted, you need to wipe the blades down once in a while but then, everybody has family cleaning chores to take care of from time to time.

A ceiling fan that seems fine but moves very little air is a relaxation to no person. Among the keys to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the higher the air movement supplying the blade pitch has been properly harmonized with the engine. Unlike Hunter some manufacturers skimp on materials and don’t utilize large enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing appropriate air movement to decrease the strain on undersized or under-powered motors. Many fans also use additional thin blades to decrease cost. The reduced blade surface region means reduced air movement.

Among the first enhancements that ceiling fan inventor Philip Diehl created on his own invention was the addition of an electric light. Back in 1882, once the ceiling fan was initially established, this was a major thing. Many homes and businesses had just gotten electricity and it was still a very novel idea. Now, it is tough to envision a ceiling fan with no light. There are three chief ways that a ceiling fan light is attached to the fan. Branched lights, sometimes called stemmed lights, bowl lighting, and up-lights are each unique techniques ceiling fans can provide illumination.

Even though this is a somewhat time-consuming procedure, it is going to address the problem when all else fails. By the way, if the producer didn’t provide any clips you can usually purchase these clips at a house center or big hardware store. If you would like, you can improvise by putting a coin or other small weight onto the top of the blade and anchoring it with a little bit of electric tape. We want to say a fast word about our discussion re you could try here. What I have realized is it really just will depend on your goals and needs as it relates to your unique situation. There are always some things that will have more of an influence than others. The best approach is to try to envision the effects each point could have on you. We will now move forward and talk more about a few points in depth.

A wet-rated fan on the other hand is made to sustain direct rain. Such fans do not need to be installed in a protected place, but can be a little more costly. Thoroughly examine your outside area to see which type better suits you. And keep in mind, putting a indoor fan outdoors can lead to risks like electric shorts.

The quantity of energy that a fan consumes plus the volume of air that the fan goes determines the fan’s overall efficiency. Small, low wattage motors can use little energy, but they also move very little air, resulting in very inefficient fans, Hunter fans are built to shift a lot of air.

If not, use a yardstick or other directly piece of wood and place it (with the fan stopped) vertically at the outer border of one of those blades. Rotate the blades by hand to make sure that each blade touches the rod. If one or more do not, simply (and gently) flex the blade(s) to ensure their pitch matches the others and repeat the process till you’re satisfied that every blade has the exact same pitch. Turn the fan on again and see whether you’ve solved the problem. Various ceiling fan options are available at different ecommerce stores.

If not, you have got a weight problem (I do not necessarily mean you, personally). The weight problem is with one or more of those blades weighing slightly over the others. This occasionally happens when the blades are made of natural, organic material such as wood. Manufacturers often include what are called “balancing weights” in the box with the ceiling fan. These can be utilized to compensate for any differentials in weight which might have resulted over time. These “balancing weights”clips or clips as they are sometime called, can be attached to the peak of the blade so that they’re almost out of sight. Start with a single blade by attaching the clip near where the blade is attached to the motor. Run the fan. If the problem persists, move the weight out towards the end of the blade. Try running the fan again. If the problem persists, keep shifting the weight. If you’re near the end of the blade and still have a problem move to another blade. Continue this process until you locate the one that has the weight problem.

A moist rating means quite simply that the fan can sustain humidity or a mild drizzle, not hard rain. Damp-rated fans are best suited where there is ample cover. This will assure that your product does not get soaked and thus damaged by rain.

In this article, we are going to address how to install a ceiling fan. We’ll walk you through it with step by step instructions on how best to do so. Keep in mind, all fans are different and you’ll need your manufacturer’s instruction. This is a basic outline which provides some tips but it isn’t a replacement for your own manual.

Leave a Reply

Your email address will not be published. Required fields are marked *